BASE OIL SN 350
Base oil SN350, is defined as a light grade base oil in the middle of the specifications of Grade I base oils. They are mainly used in lubricant and lubricant additives production. It has been solvent refined, dewaxed, and hydrogen treated to take out impurities. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.
Base Oil are produced by means of solvent refining paraffinic crude oil as below, with modern production facilities and using high-quality raw materials.
Base oils are used to manufacture products including motor oil, Industrial oil, Grease, and etc.
General-purpose oils
- Mould oil
- Transmission fluids
- Gear oils
- Metalworking fluids
- Additives
- Hydraulic oils
- Transformer oils
PHYSICAL AND CHEMICAL PROPERTIES:
| Property | Unit | Test method | Value |
| Density at 15 °C | g/cm3 | ISO 12185 | Report |
| Appearance at 25 °C | – | Visual appearance | Transparent, sediment free |
| Kinematic viscosity at 40 °C | mm2/s | ISO 3104 | 60,0 – 70,0 |
| Kinematic viscosity at 100 °C | mm2/s | ISO 3104 | Report |
| Viscosity index | – | ISO 2909 | min. 90 |
| Flash point by Cleveland | °C | ISO 2592 | min. 230 |
| Pour point | °C | ISO 3016 | max. -9 |
| Total Acidity | mg KOH/g | ISO 6618 | max. 0,05 |
| MCR | % (m/m) | ISO 10370 | max. 0,08 |
| Ash content | % (m/m) | ISO 6245 | max. 0,005 |
| Colour (ASTM) | – | ISO 2049 | max. 2,5 |
| Sulphur Content | % (m/m) | EN ISO 8754 | max. 0,40 |
| PCA | % (m/m) | IP 346 | max. 2,9 |
| CA | % | ASTM D 2140 | max. 6,0 |
| Volatility Loss by Noack | % (m/m) | ASTM D 5800 B | max. 7,0 |
| Time of Deemulsibility at 54 °C | perc | ISO 6614 | Report |
| Air Release at 50 °C | perc | ISO 9120 | Report |
| Water content | % (m/m) | ISO 9029 | max. 0,025 |
Reviews
There are no reviews yet.